Need help?Do you have a question about the Icom IC-F2000S and is the answer not in the manual?
General| Frequency Range | 136-174 MHz |
|---|---|
| Channel Capacity | 16 channels |
| Power Output | 5W |
| Water Resistance | IP54 |
| Mode | FM |
| Operating Temperature | -30°C to +60°C |
| Weight | 240 g (with BP-279 battery) |
| Battery Life | Up to 14 hours with BP-279 (Li-ion) |
Details physical components like the rotary selector, volume control, speaker jack, PTT switch, LED, and antenna connector.
Explains various icons and readouts on the transceiver's screen for status information.
Describes the meaning of different LED colors and blinking patterns for status indication.
Explains how to assign and use various function keys to access different operations and features.
Covers selecting channels and the basic procedures for receiving and transmitting audio.
Explains how to initiate an emergency signal and its automatic transmission.
Details specific emergency modes like Lone Worker, Man Down, and Motion Detection.
Allows customization of various transceiver settings like backlight, beep, and ringer levels.
Details how to turn the beep function ON or OFF.
Explains how to adjust the beep audio level.
Explains how to adjust the ringer volume.
Guides on adjusting microphone gain and squelch level for optimal audio performance.
Explains the capabilities and features of the MDC 1200 signaling system.
Describes how to receive PTT IDs, Aliases, Emergency, Stun, and Revive calls.
Outlines procedures for transmitting PTT IDs and emergency signals.
To Next Page
