Icom IC-F2000

SERVICE
MANUAL
S-15609XZ-C1-1
March 2020
UHF TRANSCEIVERS
(For versions without ANT PCB)
|F2000
|F2000S
|F2000T

Icom IC-F2000 Specifications

General

Frequency Range	136-174 MHz
Channels	128
Output Power	5W
Waterproof Rating	IP67
Number of Channels	128
Channel Spacing	12.5/25 kHz
Mode	FM
Weight	240g with BP-279

Summary

Service Cautionary Guidelines

Ordering Replacement Parts

Repair Notes and Precautions

Section 1: Specifications

Section 2: Inside Views

Section 3: Disassembly Instructions

Removing the Front Panel

Step-by-step guide on how to safely detach the front panel of the transceiver.

Removing the MainMain-B Unit

Section 4: Adjustment Procedure

4-1 Preparation for Adjustments

Outlines necessary equipment and connections for transceiver adjustments and data backup.

4-2 Frequency Adjustments

Details the procedure for adjusting frequency settings and verifying them using specific channels.

4-3 Transmit Adjustments

Covers adjustments for TX output power, modulation balance, FM deviation, CTCSS/DTCS deviation, and signal-to-noise ratio.

4-4 Receive Adjustments

Explains procedures for adjusting receive sensitivity, S-meter, squelch, and audio distortion.

4-5 After the Adjustment

Instructions for writing back programming data after completing all adjustments.

Section 5: Spare Parts and Units