Need help?Do you have a question about the Icom IC-F29SR2 and is the answer not in the manual?
General| Frequency Range | 136-174 MHz |
|---|---|
| Channels | 16 |
| Power Output | 5W |
| Current Drain (RX Max. audio) | 300mA |
| Adjacent Channel Power | 60 dB |
| Audio Output Power | 500mW |
| Mode | FM |
| Waterproof | IP54 |
| Type | FM Transceiver |
| Channel Spacing | 12.5 kHz / 25 kHz |
| Operating Voltage | 7.4 V DC |
| Receiver Sensitivity | 0.25 μV (12 dB SINAD) |
| Voltage | 7.4V |
| Spurious Emissions | Less than -60dBc |
Instructions for attaching and detaching battery pack, belt clip, and jack cover.
Guide to assigning functions to programmable keys using optional software.
Explanation of LED color and pattern meanings for transceiver status.
How to enable or disable the beep function and adjust beep volume.
Adjusts beep and announcement volume levels across a range of settings.
Adjusts the ringer volume level to different settings, including linked options.
Adjusts microphone sensitivity for optimal voice input.
Adjusts squelch sensitivity to filter unwanted background noise.
Enables or disables the Voice Operated Exchange (VOX) feature for hands-free use.
Adjusts VOX sensitivity for more responsive hands-free voice activation.
Configures CTCSS tones for silent standby and group communication.
Configures DTCS codes for silent standby and group communication.
To Next Page
