SPECIFICATIONS AND OPTIONS
8
17
■ Specifications
• GENERAL
Frequency coverage : IC-F3/S 136–150 MHz
146–174 MHz
: IC-F4/S 400–430 MHz
440–470 MHz
470–500 MHz
490–512 MHz
490–520 MHz
Mode : 16K0F3E (wide)
8K50F3E (narrow)
Usable temperature range
EIA : –22°F to +140°F
ETS, CEPT : –25°C to +55°C (IC-F3/S)
–20°C to +55°C (IC-F4/S)
Dimensions : 58 (W)×138.5 (H)×37(D) mm
(projections not included)
Weight (with BP-196) : 390 g
• TRANSMITTER
Output power : IC-F3/S 5 W
: IC-F4/S 4 W
• RECEIVER
Sensitivity (12 dB SINAD)* : IC-F3/S 0.25 µV
(
* Typical)
: IC-F4/S 0.3 µV
Intermodulation rejection ratio : More than 65 dB
Spurious response rejection ratio
: More than 70 dB
Adjacent channel selectivity : More than 70 dB (wide)
More than 60 dB (narrow)
Audio output power : 500 mW
(at 10% distortion with
an 8 Ω load)
■ Options
• HM-54/HM-46/HM-75A SPEAKER-MICROPHONES
Combination speaker-microphone that provides convenient opera-
tion while hanging the transceiver from your belt clip.
• BC-119 DESKTOP CHARGER (or BC-121 MULTI-CHARGER) +
AD-81 DESKTOP CHARGER ADAPTER
Used for rapid charging of battery packs. Charging time: 1.5 to 2
hours. An AC adapter is supplied with the chargers (depending on
version). BC-121 rapidly charges up to 6 battery packs at once.
• BC-110A/D/V WALL CHARGER
Used for charging via a domestic AC wall socket.
• CP-12L CIGARETTE LIGHTER CABLE
Used for charging via a vehicle’s cigarette lighter socket (12 V).
• OPC-254L DC POWER CABLE
Used for charging with an external power supply.
• UT-80 2-TONE UNIT
Provides 2-tone capabilities.
• UT-96 5-TONE UNIT
Provides 5-tone capabilities.
• UT-105 SmarTrunk II
TM
Logic Board
Provides SmarTrunk II
TM
operation.
• BP-194 BATTERY CASE
Takes eight (8) AA (R6) size batteries. External DC-jack on the
transceiver can be used to charge the Ni-Cd battery cells.
• SP-13 EARPHONE
Provides clear audio in noisy enviroments.
All stated specifications are subject to change without notice or
obligation.
To Next Page
