30
4
IDAS OPERATION
4
■ Position data transmission
When an optional HM-171GP or any other GPS receiver is con-
nected to the transceiver, the position (longitude and latitude) data
can be transmitted automatically when;
• After sending a Status Call
- Set the ‘Send with Status Call’ item as ‘Enable.’
• After sending an Emergency Call
- Set the ‘Send with Emergency’ item as ‘Enable.’
• After sending a Voice Call
- Set the ‘Send with Voice Call’ item as ‘Enable.’
Ask your dealer or system operator for connection details.
■ Status message transmission
The status message can be transmitted automatically.
The status message is transmitted when the transceiver is turned
ON or OFF.
- Select a status message to be transmitted in ‘Power ON Status’
or ‘Power OFF Status’ item, respectively.
- Select a target station ID in ‘Power Status ID’.
■ Encryption function
The encryption function enables voice scrambling, which provides
private digital communication between stations.
Push [Encryption] to turn the encryption function ON or OFF.
To Next Page
Loading...
Need help?
General
