CS-F30G ADJ Rev.1.0
File
COM 1: OPEN
Option
Connect
Reload (F5) Disp para
[A / D]
VIN : 197 : C5h : 7.73 V
TEMPS : 190 : BEh : 32.23 'C
LVIN : 67 : 43h : 1.31 V
SD : 27 : 1Bh : 0.53 V
BDET : 0 : 00h : 0.00 V (Ni-Cd, Ni-MH)
Power (Hi) : 98 [ # # # # # # # # – – – – – – – – – – – ]
Power (L2) : 54 [ # # # # – – – – – – – – – – – – – – – ]
Power (L1) : 54 [ # # – – – – – – – – – – – – – – – – – ]
Ballance : 132 [ # # # # # # # # # # – – – – – – – – – ]
MOD W : 95 [ # # # # # # # – – – – – – – – – – – – ]
MOD N : 47 [ # # # # – – – – – – – – – – – – – – – ]
CTCS/DTCS : 113 [ # # # # # # # # # – – – – – – – – – – ]
SQL : 0 [ – – – – – – – – – – – – – – – – – – – ]
BPF ALL : [Enter] to sweep
BPF T1 : 23 [ # # # # # # # # # # # # – – – – – – – ] [Enter] to sweep
BPF T2 : –22 [ # # # # # # # # – – – – – – – – – – – ] [Enter] to sweep
BPF T3 : 9 [ # # # # # # # # # # # – – – – – – – – ] [Enter] to sweep
BPF T4 : –7 [ # # # # # # # # # – – – – – – – – – – ] [Enter] to sweep
TXF : [Enter] to start
S-METER : [Enter] to start
[D / A]
BPF T1 : 90 : 5Ah : 1.76 V
BPF T2 : 45 : 2Dh : 0.88 V
BPF T3 : 76 : 4Ch : 1.49 V
T4/POW : 60 : 3Ch : 1.18 V
REF : 112 : 70h : 2.20V
MOD BAL : 90 : 5Ah : 1.76 V
Dev : 45 : 2Dh : 0.88 V
CTCSS : 76 : 4Ch : 1.49 V
SQL Lev : 0 : 00h : 1.18 V
CH No. : 01 RX Freq = 450.000, TX Freq = <– RF Power: Low1 Mode: Wide
: Transceiver's connection state
: Reload adjustment data
: Receive sensitivity measurement
: Connected DC voltage
: PLL lock voltage
: Operating channel select
: RF output power
: Modulation balance
NOTE:
• Screen display exampe (for conventional version)
1
5
4
6
10
11
12
15
9
14
16
1
2
3
4
5
6
9
10
7
8
11
12
13
: FM deviation
: CTCSS/DTCS deviation
: Squelch level
: Receive sensitivity (automatically)
: Receive sensitivity (manually)
: Reference frequency
: S-meter
: Adjustment items
14
15
16
The above values for settings are example only.
Each transceiver has its own specific values for each setting.
3
2
8
7
13
To Next Page
Loading...
