Icom IC-F5022 - Basic Operation: Security and Priority Functions; Scrambler and Priority Channel Functions; Stun Function Operation and Effects

12
2
BASIC OPERATION
■ Stun function
WhenthespeciedID,setasastunIDorkillID,isreceived,
the stun function is activated.
WhenthestunIDisreceived,thetransceiverbecomes
unusable. Entering of the password (p. 8) or receiving a
specified ID, set as a revive ID, is necessary to operate the
transceiver again in this case.
WhenthekillIDisreceived,thetransceiverswitchesto
the cloning required condition. Cloning the transceiver is
necessary to operate the transceiver again in this case.
Stun function is also available with the MDC 1200 signaling
system. (p. 13)
■ Scrambler function
The voice scrambler function provides private communica-
tion between stations.
The optional Rolling or Non-rolling type can be available.
q Push [Scrambler] to turn the scrambler function ON.
 •“ ” (Scrambler indicator) appears.
w Push [Scrambler] again to turn the scrambler function
OFF.
 •“ ” disappears.
■ Priority A channel selection
When one ofthefollowingoperationsisperformed,the
transceiver selects the Priority A channel automatically.
•TurningthepowerON
The Priority A channel is selected each time the trans-
ceiver power is turned ON.
•Offhook.
The Priority A channel is selected when the microphone is
took off from its hanger.