5
1
PANEL DESCRIPTION
SCAN ADD/DEL (TAG) KEY “SCAD”
Push to add a channel to, or delete it from the current scan ➥
list.
When a channel is added to the current scan list, the display •
quickly shows “SCAN ON.” When a channel is deleted from the
current scan list, the display quickly shows “SCAN OFF.” After
showing “SCAN ON” or “SCAN OFF,” the display quickly shows
the current scan list text.
You can add a channel to, or delete it from the scan list ➥
after selecting the list.
1.
Hold down for 1 second to display the current scan list, and
then push [CH Up] or [CH Down] to select a desired list.
2. Push this key to add a channel to, or delete it from the
selected list.
•
When a channel is added to the selected scan list, the display
quickly shows “SCAN ON.” When a channel is deleted from
the selected scan list, the display quickly shows “SCAN OFF.”
3. Hold down this key for 1 second to exit the scan list
selection mode.
Push this key while a scan is paused on a channel, except ➥
for primary or secondary channel, and then the channel is
deleted from the scan list.
Depending on the setting, the deleted channel is added to the •
scan list again after the scan is cancelled. (Nuisance Delete
function)
PRIO A/B KEYS
➥ Push to select Priority A or Priority B channel.
➥ Push and hold [Prio A (Rewrite)] or [Prio B (Rewrite)] for
1 sec. to assign the operating channel to the Priority A or
Priority B channel.
MR-CH 1/2/3/4 KEYS
Push to select the memory channel 1, 2, 3 or 4.
MONI KEY
➥ Push to mute and release the CTCSS (DTCS), 2-tone,
NAC or Talkgroup ID squelch mute. Open any squelch/
deactivate any mute while pushing and holding this key.
•Dependingonthepre-setting,the‘Audible’(unmute)condition
may automatically return to the ‘Inaudible’ (mute) condition, af-
ter a specified time period.
➥ Depending on the pre-setting, pushing and holding this
key for 1 sec. cancels the scan.
TALK AROUND KEY (Conventional operation only)
Turn the talk around function ON or OFF.
•Thetalkaroundfunctionequalizesthetransmitfrequencytothe
receive frequency for transceiver-to-transceiver communication.
PUBLIC ADDRESS KEY
Push to activate the Public Address (PA) function. When the
PA function is activated, the audio output can be controlled
from the transceiver separately with [CH Up] or [CH Down]
or rotate [CH Up/Down]*.
•Thisfunctionisavailablewhentheexternalunit,suchasanaudio
amplifier, speaker, etc. is additionally connected. (p. 14)
•Pushthiskey,thenspeakintothemicrophonewhilepushingand
holding [PTT].
*Simple type only
To Next Page
Loading...
Need help?
General
