11
2
BASIC OPERATION
t Push [CH Up] or [CH Down], or rotate [CH Up/Down]* to
input the ‘hour’ data for wake up time. After inputting, push
[Clock] to set.
•The‘minutes’datablinks.
y Push [CH Up] or [CH Down], or rotate [CH Up/Down]* to
Input the ‘minutes’ data for wake up time. After inputting,
push [Clock] to set.
u Push and hold [Clock] for 1 sec. to exit the clock set mode.
•Returntothestand-bymode.
*Simple type only
n Sleep function
The sleep function allows the transceiver to be automatically
turned OFF according to the sleep time setting.
q Push and hold [Clock] for 1 sec. to enter the clock set
mode.
•“WAKEUP”isindicated.
w Push [Clock] several times to select “SLEEP.”
e Push [CH Up] or [CH Down], or rotate [CH Up/Down]* to
select “ON” or “ON EXCPT EMR” to turn the sleep func-
tion ON.
•When“ONEXCPTEMER”isselected,thetransceiverwillbe
automatically turned OFF at the sleep time. However, during
the emergency mode, the sleep function will not function, even
if the sleep time period starts.
r Push [Clock] to set, and select “SLEEP TIME.”
To Next Page
Loading...
Need help?
General
