Icom IC-F9511S - Sleep Function

11
2
BASIC OPERATION
t Push [CH Up] or [CH Down], or rotate [CH Up/Down]* to
input the ‘hour’ data for wake up time. After inputting, push
[Clock] to set.
 •The‘minutes’datablinks.
WAKE UP TIME
09:25AM
y Push [CH Up] or [CH Down], or rotate [CH Up/Down]* to
Input the ‘minutes’ data for wake up time. After inputting,
push [Clock] to set.
WAKE UP TIME
09:30AM
u Push and hold [Clock] for 1 sec. to exit the clock set mode.
 •Returntothestand-bymode.
*Simple type only
n Sleep function
The sleep function allows the transceiver to be automatically
turned OFF according to the sleep time setting.
q Push and hold [Clock] for 1 sec. to enter the clock set
mode.
 •“WAKEUP”isindicated.
w Push [Clock] several times to select “SLEEP.”
SLEEP
ON
e Push [CH Up] or [CH Down], or rotate [CH Up/Down]* to
select “ON” or “ON EXCPT EMR” to turn the sleep func-
tion ON.
 •When“ONEXCPTEMER”isselected,thetransceiverwillbe
automatically turned OFF at the sleep time. However, during
the emergency mode, the sleep function will not function, even
if the sleep time period starts.
r Push [Clock] to set, and select “SLEEP TIME.”
SLEEPTIME
05:35PM