Icom IC-M57

Mi Weather channels
To select a weather channel:
1) Set up the transceiver as in basic operation.
2) Push [WX].
e “WX” appears in the function display.
f
3) Rotate the channel selector to set your desired
channel.
(MH, NUM BER ff MAD
wwe | seeawo [wer | tases
[lowers [wet so
Hi Dual watch
NOTE: Weather
channels can be
received only.
The dual watch function monitors Channel 16 every 2
sec. while you use another channel.
1) Select the desired operating channel.
| @e When Channel 16 is selected, dual watch will not
activate.
2) Rotate [SQUELCH] until the audio noise disap-
pears.
3) Push [DUAL] to start the dual watch function.
DUAL
e
“DUAL”
blinks
in
the
function
display.
e
When
a
signal
is
received
on
Channel
16,
dual
watch
stops on Channel 16 until the signal disappears.
4) Push [DUAL] again to cancel the dual watch func-
tion.