31
8
SCAN OPERATION
■ Memory (skip) scan
Memory scan repeatedly scans all programmed memory chan-
nels, except those set as skip channels.
q Push [C•
MR
] to select memory mode, if necessary.
•“
X
” appears.
w Push [A•
FUNC
], then push [5•
SCAN
] to start the scan.
• To change the scan direction, push [Y] or [Z].
• When “dial” is assigned [VOL], rotate [VOL] to change the scan di-
rection. (p. 50)
e Push [D•
CLR
] to stop the scan.
D Setting skip channels
In order to speed up the scan interval, you can set memory
channels you don’t wish to scan as skip channels.
q Push [C•
MR
] to select memory mode, if necessary.
•“
X
” appears.
w Select a memory channel to set as a skip channel.
e Push [A•
FUNC
], then push [6•
SKIP
] to toggle the skip setting ON
and OFF.
•“SKIP” appears when the channel is set as a skip channel.
IC-T3H.qxd 03.2.6 10:18 Page 31 (1,1)
To Next Page
Loading...
Need help?
General
