46
11
OTHER FUNCTIONS
DD
Tuning step
Selects tuning step from 5, 10, 12.5, 15, 20,
25 , 30 and 50 kHz.
DD
Scan pause timer
Selects the scan pause time from SCt.5,
SCt.10, SCt.15 and SCP. 2. When receiving
signals, the scan pauses according to the
scan pause time.
• SCt. 5/10/15 : Scan pauses for 5/10/15 sec.
(default: SCt.15)
• SCP. 2 : Scan pauses until the signal
disappears. Resumes 2 sec. after the signal dis-
appears.
DD
Function key timer
Selects [A•
FUNC
] effect timer from F0.At,
F1.At, F2.At, F3.At and F .m.
• F0.At : “” disappears immediately after
secondary function is operated.
(default)
• F1/2/3.At : “” disappears after 1/2/3 sec.
after secondary function is oper-
ated.
• F .m : “” appears until [A•
FUNC
] is pushed again.
DD
LCD backlight
Selects LCD backlight lighting condition from
auto, ON and OFF.
• LIG.At : Lights when any key except
[PTT] is pushed. (default)
• LIG.ON : Lights continuously while the transceiver is powered
ON.
• LIG.OF : Never lights.
To Next Page
Loading...
Need help?
General
