49
11
OTHER FUNCTIONS
DD
Auto power-off
The transceiver can be set to automatically
turn OFF after a specified period with a beep
when no key operations are performed.
• 30 min., 1 hour, 2 hours and OFF (default)
can be specified. The specified period is re-
tained even when the transceiver is turned
OFF by the auto power-off function. To can-
cel the function, select “
POF.OF” in this set mode.
DD
Repeater lock-out
Selects lockout type from repeater, busy and
OFF.
• RLO.RP : The repeater lockout is turned ON.
• RLO.bu : The busy lockout is turned ON.
• RLO.OF : No lockout is activated. (default)
DD
Squelch delay
Selects squelch delay from short and long to
prevent repeated opening and closing of the
squelch during reception of the same signal.
• Sqt. S: The squelch closes in short delay.
(default)
• Sqt. L: The squelch closes in long delay.
DD
DTMF speed
The rate at which DTMF memories send indi-
vidual DTMF characters can be set to accom-
modate operating needs.
• 1: 100 msec. interval; 5.0 cps speed
(default)
• 2: 200 msec. interval; 2.5 cps speed
• 3: 300 msec. interval; 1.6 cps speed
• 5: 500 msec. interval; 1.0 cps speed (cps=characters/sec.)
To Next Page
Loading...
