Icom IC-W2E - Accessory Information and Attachments; Handstrap and Belt Clip Attachment

aaa.
mu 4 4«#3=©ACCESSORY INFORMATION
e Handstrap attachment
The handstrap allows you to carry the transceiver easily.
Attach the handstrap as shown in the diagram.
1. Insert the handstrap using a point-
ed tool such as a sharp pencil.
3. Pull the handstrap to tighten the
knot.
2. Put one end of handstrap through
the other end's loop.
° Belt clip attachment
The belt clip allows you to attach the tran-
sceiver to your belt.
Remove the plastic screws to attach the
belt clip.
To use an optional MB-20 ALLIGATOR CLIP
with the IC-W2A/E, use the supplied screws
with the transceiver. NEVER use the screws
supplied with the alligator clip.