Icom IC-W2E - Memory Operation Procedures; Memory Channel Selection

Lee
MEMORY OPERATION OQ El
@ Selecting a memory
channel
The transceiver has 30 memory channels on each band for 1) Push [@ V/M] to select MEMORY mode.
storage of often-used frequencies.
2) Rotate the main dial to select the desired memory channel.
When first applying power or after resetting, memory chan- * Only the memory channels which have been programmed with
nels 11~30 are masked. contents will appear.
* Pushing [ A/SCAN] or [V/SCAN] also selects memory channels.
When the dial select step is set as the memory channel,
memory channels can also be selected in VFO mode. See
3) To select blanked memory channels (i.e., channels without
p.
17
for
setting
the
dial
select
step
for
memory
channel
contents),
rotate
the
main
dial
while
pushing
[F].
changing.
4) Push [@ V/M] to return to VFO mode.
[EXAMPLE]: Select UHF memory channel 30 (When memory channel 30 is blank).
VAn\)
= ®)
46.80 435.08
’ o
MEMORY mode
MEMORY mode