Icom IC-W2E - Scan Operation Guide; Scan Types and Resume Conditions

eee
mm 10 SCAN OPERATION
@ Scan types
¢ Full scan Repeatedly scans all frequen-
cies over the entire selected
Band pons band.
ns * The frequency skip function can
Scan
be used,
Each band has 4 scan types and 2 resume conditions are
available to suit your needs. Scans on both bands can be
operated separately or simultaneously.
¢ Programmed Repeatedly scans between two
scan user-programmed frequencies.
= Scan soy pang © * S€@ p. 29 for scan edge program-
on — eége ming. The frequency skip func-
tion can be used.
e Memory scan Repeatedly scans all memory
channels in sequence.
¢ Frequency skip Skips unwanted frequencies
function that inconveniently stop
scanning.
= Berd See p. 30 for programming.
Scan
¢ Memory skip Repeatedly scans memory
scan channels. Memory channels
programmed as the skip chan-
Gy) @ nels, however, are skipped while
Ese) G3) scanning.
CD\ GD *See p. 31 for skip channel
programming.
¢ Scan resume
condition
2 resume conditions are availa-
ble: pause scan and timer scan.
When receiving a signal, pause
_ at be] scan pauses until the signal dis-
appears; timer scan pauses for
Timer scan 4444- — tattttstttt approx. 5 sec.
S sec