Icom IC-W2E - Pager and Code Squelch Functions; Pager and Code Squelch Overview

nae
gum
15
PAGER
AND
CODE
SQUELCH
@ General description
e Pager function
The pager function is a selective calling system that allows
you to contact a specified station or all stations in your group.
To use the pager function in your group, all stations need the
pager function.
The pager function informs another station with your ID code
which is determined in your group, The ID code appears on
the other station’s display and is stored there for easy answer-
back. Beeps will be emitted to indicate transmission of your
ID code.
The pager function transmits a code with 7 DTMF digits:
Transmit code + “*" + Your ID code.
° Code squelch
The code squelch allows you silent standby since you will only
receive calls from stations which know your ID code.
The code squelch transmits a 3-digit code prior to voice trans-
mission.
PAGER FUNCTION
(Personal call) Leese
Group: 555
7 : \N
FE No
SID: 111 ID: 222 ID: 333 pager
L_} Group: 555 Group: 555 Group: 555 function
Les
PAGER FUNCTION 9. oo
(Group call) | Group: 555
SE
cy § Ld, a
8 x
9 %
2 No
ID; 111 ID; 222 ID: 333 pager
Group: 555 L_] Group: 555 Group: 555 function