Icom M-330GE - DSC OPERATION; Sending Individual Acknowledgements

25
DSC OPERATION
7
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Continuedonthenextpage.
Acknowledgement “Unable to comply”
Push
ALARM OFF
to turn OFF the alarm.
• TheAcknowledgeinformationisdisplayed.
L Push
STBY
, and then
OK
to return to the operating screen.
D Sending an Individual Acknowledgement
When you have received an Individual call (p.33), send an
Acknowledgementtothecallingstation.Whenyousendan
Acknowledgement,select“AbletoComply,”“ProposeNew
CH,” or “Unable to Comply.”
1. While an Individual call is being
received, push
ALARM OFF
to turn OFF
the alarm.
• Thereceivedcall’sinformationis
displayed.
2. Push
ACPT
.
• TheAcknowledgementcategoryscreen
is displayed.
L Ifyouwanttosendan
Acknowledgement“Abletocomply”
rightaway,push
ABLE
.
L Ifyoucannotcommunicate,andwant
to return to the operating screen, push
IGN
.