To Next PageTo Next PageWhat to do if the displayed channel cannot be changed on Icom IC-M1V Transceiver?
If you cannot change the displayed channel on your Icom Transceiver, the lock function may be activated. Push [H/L•LOCK] for 2 seconds to cancel the lock function.
What to do if Icom IC-M1V Transceiver scan starts automatically?
If the scan function on your Icom Transceiver starts automatically, the auto scan function is likely activated. Cancel the auto scan function in SET mode.
What to do if Icom Transceiver transmitting is impossible?
If your Icom Transceiver is unable to transmit, or high power cannot be selected, it may be due to several reasons: Some channels are set for low power or receive only, so try changing channels. The battery might be exhausted, in which case you should recharge it. Also, the output power may be set to low or extra low; push [H/L] to select high power.
How to fix Icom IC-M1V when no sound comes from the speaker?
If no sound is coming from the speaker of your Icom Transceiver, the squelch level might be set too deep; adjust the squelch to the threshold point. Alternatively, the [VOL] level may be too low; increase the [VOL] to a suitable level.
What to do if Icom Transceiver has no power ON?
If your Icom Transceiver does not power on, the battery may be exhausted; recharge the battery pack. Alternatively, there might be a bad connection with the battery pack; check the connection to the transceiver.
Why Icom IC-M1V Transceiver receive signal cannot be understood?
General| Brand | Icom |
|---|---|
| Model | IC-M1V |
| Category | Transceiver |
| Language | English |
Warnings against AC connection and using unapproved power sources.
Step-by-step procedure for making a distress call using channel 16.
Overview of the transceiver's front panel layout and controls.
How to use switches for dualwatch, tri-watch, scan, and power/lock functions.
Indicators for busy, transmit, channel group, number, ATIS, and comment.
How to select distress channel 16 and program call channels.
How to select and switch between US, International, and Canadian channel groups.
Step-by-step guide for receiving signals and transmitting voice.
How to activate the optional voice scrambler for private communication.
Explanation of priority scan and normal scan types.
How to assign channels to be scanned (tag channels).
Steps to initiate a normal or priority scan.
Steps for activating and using dual watch and tri-watch.
Procedure to enter and navigate the SET mode.
Critical safety warnings related to battery handling and charging.
Steps for charging the battery pack for the first time.
Detailed steps for charging the battery pack using the charger.
Troubleshooting steps for when the transceiver does not power on.
Troubleshooting steps for no audio output from the speaker.
Troubleshooting steps for transmission issues or high power selection.
Troubleshooting steps for unintelligible received signals.
Quick reference for channel selection (16, 9, Weather, US/INT/CAN).
Quick reference for distress call procedure using channel 16.
Summary of SET mode operations for configuring functions.
Summary of dualwatch and tri-watch operation.
Summary of initiating scan operations.
Summary of setting tag channels for scanning.
