To Next PageTo Next PageWhat to do if ICON Health & Fitness Treadmill turns off during use?
If your ICON Health & Fitness Treadmill turns off during use, check the power switch. Make sure the power cord is securely plugged in; if it is, unplug it, wait five minutes, and then plug it back in. Also, try removing and reinserting the key from the console.
What to do if walking belt is off-center on ICON Health & Fitness NordicTrack Commercial 1250?
If the walking belt on your ICON Health & Fitness Treadmill has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn. If the walking belt has shifted to the right, turn the left idler roller screw counterclockwise 1/2 of a turn.
Why walking belt slows down on ICON Health & Fitness Treadmill?
If the walking belt on your ICON Health & Fitness Treadmill slows down when you walk on it, and you suspect it's overtightened (which can decrease performance and damage the belt), remove the key and unplug the power cord. Then, use the hex key to turn both idler roller screws counterclockwise, 1/4 of a turn.
General| Speed | 0-12 MPH |
|---|---|
| Folding | Yes |
| Incline | 12% |
| Decline | -3% |
| Weight Capacity | 300 lbs |
| Programs | iFit Enabled |
| Heart Rate Monitoring | Wireless chest strap included |
Explains the importance and specifications of using a surge suppressor.
Details how to properly connect the power cord to the surge suppressor and outlet.
Steps to turn on the treadmill console, including key insertion and safety clip.
Connects the console to a wireless network for iFIT and other features.
Inserts key, selects home screen, and starts the walking belt.
Adjusts treadmill speed and incline using console buttons or screen slider.
Inserts key, selects workout, and starts the treadmill.
Logs into iFIT, selects workouts from library or home screen.
Accesses the main settings menu on the console.
Explores and modifies various console settings like account, equipment, and Wi-Fi.
Customizes workout features, unit of measurement, and other equipment settings.
Checks for firmware updates and calibrates the incline system.
Connects the console to a wireless network by selecting and entering credentials.
Instructions on how to safely fold, unfold, and prepare the treadmill.
