To Next PageTo Next PageWhat to do if ICON Health & Fitness NordicTrack Z 1300i power turns off during use?
If the power to your ICON Health & Fitness Treadmill turns off during use, check the power switch. If it has tripped, wait five minutes, then press it back in. Also, ensure the power cord is properly plugged in; if it is, unplug it, wait five minutes, and plug it back in. Try removing and reinserting the key from the console.
How to fix ICON Health & Fitness NordicTrack Z 1300i Treadmill power does not turn on?
If your ICON Health & Fitness Treadmill power does not turn on, ensure the power cord is plugged into a surge suppressor and that the surge suppressor is plugged into a properly grounded outlet. If you're using an AFCI-equipped outlet and the circuit breaker trips repeatedly, consider purchasing an arc filter. Also, make sure the key is inserted into the console and that the console is activated according to assembly step 20. If the switch has tripped, wait five minutes before pressing it back in to reset it.
What to do if ICON Health & Fitness Treadmill walking belt is off-center or slips?
To fix an off-center or slipping walking belt on your ICON Health & Fitness Treadmill, first remove the key and unplug the power cord. For an off-center belt, if it has shifted to the left, use a hex key to turn the left idler roller screw clockwise 1/2 turn; if it has shifted to the right, turn the left idler roller screw counterclockwise 1/2 turn, being careful not to overtighten it. If the belt slips when walked on, turn both idler roller screws clockwise 1/4 of a turn.
General| Brand | ICON Health & Fitness |
|---|---|
| Model | NordicTrack Z 1300i |
| Category | Treadmill |
| Language | English |
