To Next PageTo Next PageHow to fix ICON Health & Fitness Treadmill when the power does not turn on?
First, ensure the power cord of your ICON Health & Fitness Treadmill is securely plugged into a surge suppressor, and that the surge suppressor is connected to a properly grounded outlet. Also, confirm that the key is fully inserted into the console. If the power switch has tripped (protrudes), wait five minutes before pressing it back in.
What to do if ICON Health & Fitness NordicTrack EXP 14i Treadmill turns off during use?
If your ICON Health & Fitness Treadmill shuts off during use, check the power switch to see if it has tripped; if so, wait five minutes, then press it back in. Ensure the power cord is fully plugged in; if it is, unplug it, wait five minutes, and plug it back in. Also, try removing and reinserting the key from the console.
Why walking belt is off-center or slips when walked on ICON Health & Fitness Treadmill?
If the walking belt on your ICON Health & Fitness Treadmill is off-center or slips, first remove the key and unplug the power cord. If the belt has shifted left, use a hex key to turn the left idler roller screw clockwise 1/2 turn. If it shifted right, turn the left idler roller screw counterclockwise 1/2 turn. Plug the cord back in, insert the key, and walk on the treadmill to test. If the belt slips, turn both idler roller screws clockwise 1/4 turn with the hex key.
General| Running Area | 20" x 60" |
|---|---|
| Decline | -3% |
| Speed | 0-12 MPH |
| Folding | Yes |
| Weight Capacity | 300 Lbs |
| Incline | 12% |
| Display | 14" HD Touchscreen |
