To Next PageTo Next PageWhat to do if ICON Health & Fitness Treadmill power turns off during use?
If your ICON Health & Fitness Treadmill turns off during use, there are several potential solutions: * Check the power switch. If it has tripped, wait five minutes, then press it back in. * Ensure the power cord is securely plugged in. If it is, unplug it, wait five minutes, and plug it back in. * Remove and reinsert the key from the console.
How to fix ICON Health & Fitness Treadmill power not turning on?
If your ICON Health & Fitness Treadmill power does not turn on, consider the following: * If you're using an extension cord, ensure it is a 3-conductor, 14-gauge (2 mm[2]) cord no longer than 5 ft. (1.5 m). * Make sure the key is properly inserted into the console. * Check the power switch located on the treadmill frame. If it's tripped (protruding), wait five minutes, then press it back in to reset it.
General| Brand | ICON Health & Fitness |
|---|---|
| Model | NordicTrack T6.5 S |
| Category | Treadmill |
| Language | English |
Guides on turning on the treadmill and operating in manual mode.
Instructions for selecting and starting pre-programmed workouts.
Solutions for common problems like power, display, and belt issues.
