To Next PageTo Next PageWhat to do if ICON Health & Fitness NTL19221.0 Treadmill turns off during use?
If your ICON Health & Fitness Treadmill shuts off during use, check the power switch; if it has tripped, wait five minutes before pressing it back in. Ensure the power cord is properly plugged in; unplug it, wait five minutes, then plug it back in. Also, try removing and reinserting the key from the console.
How to fix ICON Health & Fitness Treadmill walking belt that is off-center?
If the walking belt on your ICON Health & Fitness Treadmill is off-center, remove the key and unplug the power cord. If the belt has shifted left, turn the left idler roller screw clockwise 1/2 turn; if it has shifted right, turn it counterclockwise 1/2 turn. Plug the cord back in, insert the key, and walk on the treadmill for a few minutes, repeating until centered. If the belt slips, remove the key and unplug the power cord. Turn both idler roller screws clockwise 1/4 turn. A correctly tightened belt allows you to lift each edge 2-3 inches off the platform. Plug the cord back in, insert the key, and walk on the treadmill for a few minutes, repeating until properly tightened.
General| Model | NTL19221.0 |
|---|---|
| Brand | ICON Health & Fitness |
| Type | Treadmill |
| Speed Range | 0-12 MPH |
| Running Surface | 20" x 60" |
| Weight Capacity | 300 lbs |
| Folding | Yes |
| Incline Range | 0-15% |
| Display | 7-inch Smart HD Touchscreen |
| Heart Rate Monitoring | EKG Grip Pulse |
