Need help?Do you have a question about the iCON Pro Audio Upod Pro and is the answer not in the manual?
General| Type | USB Audio Interface |
|---|---|
| Audio Inputs | 2 |
| Audio Outputs | 2 |
| Microphone Input | 1 x XLR |
| Instrument Input | 1 x 1/4" TS |
| Headphone Output | 1 x 1/4" TRS |
| Line Output | 2 x RCA |
| Max Sample Rate | 48 kHz |
| Bit Depth | 16-bit |
| USB Interface | USB 2.0 |
| Power | USB Bus Powered |
| Monitoring | Direct Monitoring |
| Driver | ASIO, WDM |
Lists the included items such as the interface, quick start guide, and USB cable.
Describes the hybrid connectors for XLR and 1/4" TS microphone inputs.
Details the high impedance input for guitar/bass with its gain control.
Explains the switch for supplying +48V phantom power to XLR inputs for condenser mics.
Controls for setting the input level of microphone and instrument inputs.
Potentiometer for adjusting the master output level of analog outputs.
Controls for adjusting the output level of the associated headphone output.
Describes the 1/4" stereo TRS headphone connector.
Control for adjusting the input level of the RCA inputs.
Knob to select one of the 72 built-in DSP effects.
Knobs for adjusting the Hi, Mid, and Low EQ parameters for inputs 1 & 2.
Button to activate music fade-out when mic signal is present.
Knobs for adjusting BGM ramping speed and ducking amount.
Buttons for controlling input signal routing and processing to the PC.
Controls for selecting output signals, including DSP effected or direct signals.
Details the unbalanced analog inputs on RCA connectors.
Describes the unbalanced analog outputs on 1/4" TS connectors.
Details the unbalanced analog stereo output on a 3.5mm connector.
Explains the connection for the USB cable to the Mac/PC.
Information on connecting the required power adapter.
To Next Page