5
Features
The ICON Upod Pro USB recording interface provides an audio input and output
module with USB connectivity. Main features include:
● 16-Bit 48KHz 2 mic-In/1 guitar-In, 2-Out USB Recording Interface
● 2x2 analog I/O full duplex recording and playback
● ICON innovative unique mic preamp with individual gain control.
● Equipped with +48V & +5V phantom power.
● Built-in ICON 72-DSP effect with control knob on the top panel.
● 2 analog outputs on 1/4” TRS jacks or stereo output on 3.5mm phone connector.
● Build-in stereo RCA input with individual gain control
● Functions as a stand-alone device with RCA input & DSP processing.
● Equipped with Hi, Mid & Low EQ adjustment knobs.
● Attenuator (Voice-Over) function button equipped for music fade-out automatically
when mic signal is present.
● Two Voice-Over function control knobs for adjusting the BGM ramping speed and
ducking amount.
● Buttons equipped for controlling mic signal (dry/wet) recording to PC.
● Buttons equipped for controlling monitoring signal (dry/wet).
● Master volume control on the top panel
● 2 headphone outputs on 1/4” TRS jacks with individual volume control
● USB2.0 compatible
● Plug & play and no driver installation is needed.
● Compatible with Mac OS (Intel-Mac) and Windows XP, Vista (32-bit/64-bit),
Windows 7 (32-bit/64-bit), Windows 8 (32-bit/64-bit) & Windows 10 (32-bit/64-bit)
● Full duplex, simultaneous record/playback
To Next Page