32
Restore the factory default settings
Reverse sustain pedal connector polarity
To restore your ikeyboard X settings to factory default, simply import the “Factory Default”
setting le into your ikeyboard X with the original setting of the iMap software.
There are two major type of sustain pedal on the market, they are having a reverse polarity
and thus will have the exact opposite reaction. You may adjust the polarity of your iKeyboard
X sustain pedal connector with the provided iMap (V1.03 or above). Please follow the below
instructions to adjust the polarity.
1.Launch iMap again and click “MIDI Devices” button to select iKeyboard X or USB Audio
Device form the pop-up menu
2.Click the ‘Sustain Pedal” logo and select “reverse” on the left-side pull down menu.
3.Click “Send Data” button to upload the settings to your iKeyboard X.
4.Close iMap software.
To Next Page
Loading...
Need help?
General
