To Next PageTo Next Page
Need help?Do you have a question about the ICON Legend Series and is the answer not in the manual?
General| Polar Pattern | Cardioid |
|---|---|
| Color | Black |
| Type | Condenser |
| Frequency Response | 20Hz - 20kHz |
| Load Impedance | 1000 ohms |
| Phantom Power Requirement | 48V |
| Connector | XLR |
| Sensitivity | -37dB±2dB (0dB=1V/Pa at 1kHz) |
Detailed safety instructions for operating the apparatus safely and preventing hazards.
Welcome message, overview of the manual's content and product warranty.
Lists the key attributes and capabilities of the Apollo/Artemis microphone.
Guides on setting up, powering, and using the Apollo/Artemis microphone.
Explains how to connect and supply phantom power to the microphone.
Guides on adjusting the microphone's input signal level for optimal recording.
Provides advice on optimal positioning of the microphone for sound quality.
Discusses how to avoid or mitigate vocal plosive sounds (P-pops) during recording.
Instructions on how to attach the microphone to its suspension mount.
Detailed technical data, frequency response chart, and polar pattern of the microphone.
Procedures and contact information for servicing or repairing the product.
