32
‘On the iMAP, right-click the switchgear to ‘Reset to default’ values (i.e. the initial
value of the current DAW mode you are in), if you decide you no longer wish to retain
your MIDI mapping choices. The touchscreen can similarly be reset in this way.
Please note that when using ‘Bitwig,’ right-clicking on any encoder and selecting
‘restore to default’ will result in all switchgear, (and the touchscreen) reverting to their
initial values.
Equally, selecting an alternative DAW (DAW buttons 1-3) will ‘overwrite’ any user
programming to that of the selected DAW.
To Next Page
Loading...
