14
13. Setup your DAW
The Platform M+, Platform X+ & Platform B+ built-in Mackie Control, LogicPro
and HUI protocol, which will save you considerable trouble in setting up the
device at your DAW. Simply add the “Mackie Control” or “HUI” device under the
“MIDI Controller” on your software. After the Mackie Control or HUI device has
been added, select Platform M+ controller as your MIDI input and output device
in your DAW.
(Note: You will only see Platform M+ on your hardware list as Platform B+ will be
recognized as part of Platform M+.)
(Tip: You may also refer to our website at www.icoproaudio.com, where you’ll
nd set up illustrations for different DAW’s in each controller (Platform B+) product
page’s “Setup demo” section.
For DAW’s not on our setup demo list, please refer to your software user manual
for hardware setup.)
To Next Page
Loading...