ICON Utrack - Technical Specifications; Mic;Inst Input Specifications; Line Output Specifications; Headphone Output Specifications

Specifications (Measured at 48KHz Sample Rate)
14
Frequency Response:
Dynamic Range:
Signal-to-Noise Ratio:
THD+N:
Crosstalk:
Maximum Input level:
Input Impedance:
Adjustable Gain:
Total Gain Range:
Frequency Response:
Dynamic Range:
Signal-to-Noise Ratio:
THD+N:
Crosstalk:
Nominal Output Level:
Maximum Output Level:
Output Impedance:
Load Impedance:
Frequency Response:
Power into Ohms:
THD+N:
Signal-to-Noise Ratio:
Max Output Level into 100 Ohms:
Output Impedance:
Load Impedance:
Mic/Inst Inputs 1/2 (Balanced; at Minimum Gain):
Line Outputs 1-2 (TRS):
Headphone Output 1 (at Maximum Volume; Into 100 Ohm load):
22Hz to 22kHz (+/-0.1dB)
100dB, A-weighted
-100dB, A-weighted
<0.0061% (-90dB)
-100dB @ 1kHz
-3.8dBu, typical
Inst in: 500K Ohms, typical;
Mic in: 1.8K Ohms, typical
> 50dB
+54dB
22Hz 22kHz (+/-0.1dB)
102dB, A-weighted
-102dB, A-weighted
<0.003% (-90 dB)
-100dB @ 1kHz
Balanced: +4dBu
Unbalanced: -10dBV
Balanced: +10.2dBu, typical;
Unbalanced: +2.0dBV, typical
150 Ohm
600 Ohm minimum
22Hz to 22kHz (+/-1dB)
90 mW into 100 Ohms
<0.06% (-66dB)
-90dB, A-weighted
+2.0dBV, typical
75 Ohm
32 to 600 Ohms