The ICON Utrack Pro is a 4-in/4-out recording USB interface with MIDI and S/PDIF I/O, designed for mobile audio input and output. It offers USB connectivity and a robust set of features for recording and playback.
Function Description:
The Utrack Pro serves as a central hub for connecting microphones, instruments, and other audio devices to a computer for recording and monitoring. It provides both analog and digital input/output options, along with MIDI connectivity for controlling musical instruments and software. The device supports full-duplex, simultaneous record/playback, making it suitable for professional audio production. Its hardware direct/PC monitoring adjustment knob allows users to blend between direct input monitoring and the processed signal from the computer, addressing latency concerns during recording.
Important Technical Specifications:
- Frequency Response: 22Hz to 22kHz (+/-0.1dB)
- Dynamic Range: 100dB, A-weighted
- Signal-to-Noise Ratio: -100dB, A-weighted
- THD+N: <0.0061% (-90dB)
- Crosstalk: -100dB @ 1kHz
- Maximum Input Level: -3.8dBu, typical
- Input Impedance: Inst In: 500K Ohms, typical; Mic In: 1.8K Ohms, typical
- Adjustable Gain: >50dB
- Total Gain Range: +54dB
- Frequency Response: 22Hz to 22kHz (+/-0.1dB)
- Dynamic Range: 100dB, A-weighted
- Signal-to-Noise Ratio: -100dB, A-weighted
- THD+N: <0.0061% (-90dB)
- Crosstalk: -100dB @ 1kHz
- Nominal Input Level: Balanced: +4dBu; Unbalanced: -10dBu
- Maximum Input Level: Balanced: +10.2dBu, typical; Unbalanced: +2.0dBu, typical
- Input Impedance: 10K Ohms, typical
Line Outputs 1-4 (TRS):
- Frequency Response: 22Hz 22kHz (+/-0.1dB)
- Dynamic Range: 102dB, A-weighted
- Signal-to-Noise Ratio: -102dB, A-weighted
- THD+N: <0.003% (-90 dB)
- Crosstalk: -100dB @ 1kHz
- Nominal Output Level: Balanced: +4dBu; Unbalanced: -10dBu
- Maximum Output Level: Balanced: +10.2dBu, typical; Unbalanced: +2.0dBu, typical
- Output Impedance: 150 Ohm
- Load Impedance: 600 Ohm minimum
Headphone Outputs 1 & 2 (at Maximum Volume; into 100 Ohm load):
- Frequency Response: 22Hz to 22kHz (+/-1dB)
- Power into Ohms: 90 mW into 100 Ohms
- THD+N: <0.05% (-66dB)
- Signal-to-Noise Ratio: -90dB, A-weighted
- Max Output Level into 100 Ohms: +2.0dBV, typical
- Output Impedance: 75 Ohm
- Load Impedance: 32 to 600 Ohms
System Requirements:
- Windows XP: Pentium 3 500 MHz or higher, 128 MB RAM, DirectX 8.1 or higher, Windows XP (SP1), Windows 2000 (SP3) or Windows Vista.
- Mac OS: Macintosh G3 500 MHz or higher, 128 MB RAM (OS 9), 256 MB RAM (OSX), OS 9.2 or later, or OS 10.1.5 or later.
- Important: The Utrack Pro only supports USB 2.0. Your computer must have an USB2.0 port.
Usage Features:
- 4 x 4 Analog Balanced I/O: Provides flexible connectivity for various audio setups.
- Dual Microphone/Instrument Preamps: Equipped with gain controls, LED metering (CLIP and SIGNAL indicators), phantom power (+48V) for condenser microphones, and input gain control. These hybrid connectors accept standard three-pin XLR plugs or 1/4" TS connectors.
- Two Analog Inputs and Four Analog Outputs: Utilizes 1/4" TRS jacks for balanced connections. Line inputs 3 and 4 are balanced analog inputs on standard 1/4" TS connectors at +4dB line level. Line outputs 1-4 are balanced analog outputs on standard 1/4" TS connectors at +4dB line level, with outputs 1-2 supporting standard stereo and 4 mono configurations.
- S/PDIF I/O: Features RCA coaxial connectors for digital audio input and output, supporting sampling rates from 44.1Hz to 192KHz.
- Two Headphone Outputs: Each output has an assignable source and individual volume control. These accept standard 1/4" stereo TRS headphone connectors.
- Hardware Direct / PC Monitoring Adjustment Knob: Allows users to blend between direct hardware monitoring (Clockwise - "Direct Out") to eliminate latency, and monitoring with effects from the computer (Counter-Clockwise - "COMP") using low-latency ASIO monitoring.
- MIDI I/O: Standard 5-pin DIN connectors for MIDI input and output.
- Software Support: Compatible with Direct Sound, WDM, ASIO, and GIGA studio.
- Control Panel: The Utrack Pro includes a software control panel for managing sample rate settings (44.1KHz to 192KHz), buffer size settings (Streaming, ASIO, WDM), device settings (serial no., product ID), S/PDIF status and pass-through, and WDM Sound Device Configuration. It also features Hardware Inputs Mixer and Software Inputs Mixer for detailed control over input and output channels, including level metering, link switch, mute switch, gain control, and input/output matrix switches.
- Stackable Design: The unit is designed with bumpers, allowing it to be stacked with other ICON Reo Series gears.
Maintenance Features:
- Rugged Aluminum Construction: Ensures durability and longevity of the device.
- Servicing Instructions:
- Ensure the problem is not related to operation error or external system devices.
- Pack the unit in its original packaging, including end card and box. If original packaging is lost, ensure proper packing to prevent damage during transit, as ICON is not responsible for non-factory packing damage.
- Contact your ICON dealer or the nearest ICON distributor/regional office for a return authorization and shipping instructions.
- Cleaning: Clean only with a dry cloth.
- Safety Precautions:
- Do not block any ventilation openings.
- Do not install near heat sources.
- Do not defeat the safety function of the polarized or grounding-type plug.
- Protect the power cord from being walked on or pinched.
- Only use attachments/accessories specified by the manufacturer.
- Unplug during lightning storms or when unused for long periods.
- Refer all servicing to qualified service personnel.
- Do not expose to rain or moisture.
- Do not allow liquids or objects to fall into the apparatus.
Need help?
General
To Next Page
