Copyright © 2014 ICP DAS Co., Ltd. All Rights Reserved. ∗ E-mail: service@icpdas.com - 55 -
Step 5: Upload the firmware file to MDC-700
Right-click on the MDC7XXV109.HEX file and select Upload from the menu.
Step 6: Wait until the firmware update is finished, and then power cycle the MDC-700.
3. Check the Firmware Version
Step 1: Open a web browser and enter the IP address of the MDC-700 in the URL.
Step 2: Check the version information at the bottom of the page.
To Next Page
Loading...
