Copyright © 2014 ICP DAS Co., Ltd. All Rights Reserved. ∗ E-mail: service@icpdas.com - 18 -
3. Getting Started
A new MDC-700 comes with a default IP address of 192.168.255.1; therefore, a valid IP address
should be assigned for the module to join your network. Then you can configure the MDC module
from its web user interface.
The factory default settings
STEP 1: Connect the MDC module to the same network as your computer and power on all the
devices. You can also connect the module to PC directly with an Ethernet cable.
To Next Page
Loading...
