PART 1
INSTALLATION
ii_ii/ii
1) SAFETY LABELLING AND SIGNAL
WORDS
1.1) Danger, Warning and Caution:
The signal words DANGER, WARNING and CAUTION
are used to identify levels of hazard seriousness. The
signal word DANGER is only used in product labels to
signify an immediate hazard. The signal words
WARNING and CAUTION will be used on product
labels and throughout this manual and other manuals
that may apply to the product.
I CAUTION I
2)
SAFE INSTALLATION
REQUIREMENTS
Installation or repairs made by unqualified
persons can result in hazards to you and
others. Installation MUST conform with
codes or, in the absence of local codes,
with codes of the country having
jurisdiction.
The information contained in this manual
is intended for use by a qualified service
technician familiar with safety procedures
and equipped with the proper tools and
test instruments,
Failure to carefully read and follow all
instructions in this manual can result in
furnace malfunction, property damage,
personal injury and/or death.
1.2) Signal Words:
DANGER - Immediate hazards which WILL result in
death or serious injury.
WARNING - Hazards or unsafe practices which
COULD result in death or injury.
CAUTION - Hazards or unsafe practices which COULD
result in personal injury or product or property damage.
1.3) Signal Words in Manuals
The signal word WARNING is used throughout this
manual in the following manner:
The signal word CAUTION is used throughout this
manual in the following manner:
NOTE: It is the personal responsibility and obligation of
the customer to contact a qualified installer to ensure
that the installation is adequate and conforms to
governing codes and ordinances.
The furnace must be installed in a level
position, never where it will slope to the
front.
If the furnace were installed in that
position, oil could drain into the furnace
vestibule and create a fire hazard, instead
of draining properly into the combustion
chamber.
3
Fire hazard
To Next Page
Loading...
