ICP TAC-292 User Manual

8
Selecting air conditioner modes
TIM
E
R C
LEA
R
I FE
EL
DELAY
SW
EEP
SEL
❷
TIMER CLEAR
I FEEL
DELAY
SWEEP
SEL
❶
TIMER CLEAR
I FEEL
DELAY
SWEEP
SEL
❸
Note:
You can select the operating mode on the remote control even if the air conditioner is not currently on. Later, switch the
airconditioner on by pressing the on/off button
and the air conditioner will function according to the mode you
selected.
If you did not press any buttons or make any selections for ten (10) seconds,
the fan symbol will blink again (the initial mode when you opened the flap).
❸

When you have selected the desired mode, press the
SEL
SEL button to
select that mode.
❷

Press right or left buttons to select the desired operating mode.

Press the plus sign button once to move to the operating modes section.
One of the operating modes blinks. For example -
heating mode blinks.
❶
TIMER CLEAR
I FEEL
DELAY
SWEEP
SEL
SEL
SEL
BEEP
AIR-CONDITIONER
T
U
R
B
O
-J
E
T
E
C
O
N
O
M
Y
Select Button SEL
Left -Right
navigation buttons
Up-Down
navigation buttons
Always point the remote
at the air conditioner
Close the Flap door.

ICP TAC-292 Specifications

General

Brand	ICP
Model	TAC-292
Category	Remote Control
Language	English