6
For Beginners - Winter Operation
If you wish to change the air conditioner's set temperature
(warmer/cooler)
Press the button with the minus sign or the button with the plus sign .
Each time you press the minus button
the temperature is reduced (cooler) by one degree centigrade.
Each time you press the plus button
the temperature is increased (warmer) by one degree centigrade.
To increase air volume
Press the
TURBO-JET
TURBO-JET. Turbo-Jet button for
maximum air volume.
Displayed symbols
TURBO-JET
ECONOMY
TURBO-JET
ECONOMY
A command is sent to the air
conditioner (The air
conditioner beeps to
confirm).
The fan spins at high speed
To minimize air volume
Press the
ECONOMY
ECONOMY button for low, economical
and quiet speed.
Displayed symbols
A command is sent to the
air conditioner (The air
conditioner beeps to
confirm).
The fan spins at low speed
Changing the fan speed
Important
The units are designed to work in heat mode only down to -10°C (14°F) outdoor
ambient temperature.
If at starting time outdoor temperature is equal or lower than -10°C (14°F) the
unit will not start and the filter led will flash five (5) times to indicate that low
temperature protection is activated.
To Next Page
Loading...
Need help?
General
