© 2021 ICS®, Oregon Tool Inc. REV12232021 P/N 610794
536-E OPERATOR MANUAL
15
components.
• The tool contains safety features, designed to protect against electric shock,
concrete slurry.
• Parts with damage or excessive wear should not be used or repaired, they should
be replaced.
Use only Genuine ICS replacement parts. Use of aftermarket parts may result in
injury or damage to the power cutter.
WARNING
The integral water supply channels in the guidebar act to cool and lubricate the cutting
system as well as to suppress dust and debris generated during cutting. Assure that
Never attempt to cut ductile iron pipe or similar pipe materials with the
in the cut which may result in chain breakage, pushback and/or kickback.
Safety
To Next Page
Loading...