© 2021 ICS®, Oregon Tool Inc. REV12232021 P/N 610794
536-E OPERATOR MANUAL
39
Technical Speccations
TECHNICAL SPECIFICATIONS
Input Voltage Hz
16 A
No load speed
lb/ kg
Length
Height
Vibration* A
hv,eq
Concrete Cutting
m/s
1.5 m/s
Guaranteed Sound Pressure Level L
wa
Guaranteed Sound Power Level L
wa
5 kVA
1
C
/ 5.5 bar
/
/
Max Power Output 3.6 Hp
contact ICS for instruction: 800.321.1240.
/ mm
/ mm
/ mm
*Declared vibration total value has been measured in accordance with a standard test method and may be used for
comparing one tool with another. Declared vibration total value may also be used in a preliminary assessment of
exposure.
WARNING: vibration emission during actual use can dier from declared value depending on the ways in which the
tool is used. Identify safety measures to protect the operator that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched o and
when it is running idle in addition to the trigger time).
To Next Page
Loading...