ICS 536-E - Maintenance

© 2021 ICS®, Oregon Tool Inc. REV12232021 P/N 610794
536-E OPERATOR MANUAL
35
Maintenance

Drive Shaft
Drive Sprocket

• Disconnect power cutter from the power source.
• 
• 
• 
• 
• Slide new sprocket onto spline adapter.
• 
• Slide spline adapter and drive sprocket onto shaft (assure flanged side of
adapter is facing out)
• 
in shaft groove
• Installation of new drive sprocket is complete.
• 
• 
damaged guidebar and chain can damage the new drive sprocket.