© 2021 ICS®, Oregon Tool Inc. REV12232021 P/N 610794
536-E OPERATOR MANUAL
5
V = Volts
A = Amps
= Alternating Current
Hz = Hertz (frequency)
gpm = Gallons Per Minute
psi = Pounds per Square Inch of Pressure
bar = Metric unit of pressure approximating one atmosphere
Symbols & Labels
SYMBOLS AND LABELS
8
DO NOT USE A LADDER
Never stand on a ladder when using
the power cutter.
KERF WIDTH
Do not insert tool into slot
narrower than chain.
SOUND POWER
Sound power level
SLIPPERY SURFACE
accidents.
AVOID CONTACT WITH
MOVING PARTS
Contact with moving parts can
DO NOT USE IF POWER CORD
IS CRACKED OR FRAYED
Damaged cords can cause
electrocution.
CONNECT GROUNDED
OUTLETS ONLY
Provides protection against risk of
MAINTAIN ADEQUATE
WATER SUPPLY
Ensure water delivery of
lubricate and keep chain clean.
CHAIN DIRECTION OF TRAVEL
Additional compatible bar & chain
part numbers listed on page 37.
To Next Page
Loading...