680ES OPERATOR MANUAL
4
© 2015 ICS®, Blount International Inc. Specications are subject to
change without notice. REV071315 F/N 577451
SYMBOLS AND LABELS
THE FOLLOWING SYMBOLS ARE FOUND THROUGHOUT THIS MANUAL
AND/OR ON THE SAW AND ARE DESIGNED TO MAKE YOU AWARE OF POTENTIAL
HAZARDS OR UNSAFE PRACTICES.
Symbols & Labels
SAFETY ALERT
Indicates that the text that
follows explains a danger,
warning or caution.
READ INSTRUCTIONS
The original instruction manual
contains important safety and
operating information. Read and
follow the instructions carefully.
WEAR LONG PANTS
Wear long pants when operating
the saw.
WEAR FOOT PROTECTION
Wear appropriate closed-toe
boots when operating the saw.
WEAR HAND PROTECTION
Wear hand protection when
operating the saw.
KERF WIDTH
Do not insert tool into slot
narrower than chain.
VENTILLATION REQUIRED
Use tool in a well ventillated area
WEAR EYE, HEARING AND
RESPIRATORY PROTECTION
WEAR HEAD PROTECTION
Wear eye , hearing
and respiratory protection and a
protective helmet when
operating the saw.
To Next Page
Loading...
