The default IP address of the unit is "192.168.0.180", but any unit
connected to a network with a DHCP server will be assigned a
different IP address automatically. To find the assigned address use
the front display screen on the unit and navigate to the Network
Status screen (see Section 3.2.2).
NOTE: Take note of the assigned IP address displayed and use this in the
browser address field to access the unit remotely.
The IP address of any ICT unit on a local network can be found by
running the ICT "IP Address Discovery tool", after installing it on a
Windows computer connected to the same network (tool available
for download from ICT http://www.ict-power.com/resources/tools-
utilities/). This tool does not support macOS.
2. Log into the unit’s built-in server when prompted with the username
and password. The default username is "admin", and no password
is required as the factory default.
To log out of the ICT Distribution Series 3 GUI, click on the Logout link on
the top right of the browser window. The system will also automatically log
off the user after 20 minutes of inactivity.
4.2 Status & Control
Once successfully logged in, the Status & Control tab will be shown in the
browser.
To Next Page
Loading...
Need help?
General
