iDataLink ADS-ALCA - Module Programming; Module Programming Procedure

U.S. Patent No. 8,856,780
>>
01
ENGINE
START
STOP
STOP ACC ON START
ON
02
03
04
ENGINE
START
STOP
STOP ACC ON START
STOP
05
06
07
MODULE PROGRAMMING PROCEDURE - 1 OF 1
Between each step, LED will turn solid RED,
this is the default standby mode. The takeover
is not available.
Push start button twice [2x] to ON position.
LED will turn solid RED.
Within 5 seconds, LED will fl ash GREEN
rapidly.
Push start button once [1x] to OFF position.
Press unlock button once [1x] on OEM keyfob.
Wait, LED will turn solid GREEN for 2 seconds.
Module Programming Procedure completed.
www.idatalink.comAutomotive Data Solutions Inc. © 2017 OEMALRSTL6ADSALCAEN
PAGE 28 OF 35
• 20170324
DOC.: #37575