REVISION DATE
20170324
DOCUMENT NUMBER
NOTICE The manufacturer will accept no responsability for any electrical
damage resulting from improper installation of this product, be that either
damage to the vehicle itself or to the installed device. This device must be in-
stalled by a certified technician. Please review the Installation Guide carefully
before beginning any work.
BEFORE INSTALLATION
1- Connect module to computer
2- Login to Weblink account
3- Flash firmware to module (module is not preloaded with firmware)
4- Use accessories accordingly (accessories are sold separately)
U.S. Patent No. 8,856,780
INSTALL GUIDE
OEMALRSTL6ADSALCAEN
HARDWARE
ADSALCA
ACCESSORIES
ADSUSB REQUIRED
FIRMWARE
OEMALRSTL6ADSALCA
www.idatalink.comAutomotive Data Solutions Inc. © 2017
37575