Zhuhai Bell Technology Co., Ltd
4.3.3 切片打印
（1）点击导入模型→选择模型（.stl）→设置打印参数→点击切片→导出切片文件（.gcode）到内存卡
Click Import Models→ select model (.stl) → Set printing parameters → Click Slice → Export
slice file (.gcode) to SD card
（2）把内存卡插入卡槽→Print from Media→选择打印文件
Insert SD card into the card slot → Print from Media → Select the print file
（4）等待打印完成取下模型。
注意：对切片模型左右方向有要求时，需先进行-沿 X 轴镜像。
Note: When there are requirements for the left and right directions of the slice model, mirror x-axis
needs to be performed first
To Next Page
Loading...
Need help?
General