Zhuhai Bell Technology Co., Ltd
②检查喷头、主板的接线是否松动
8、传送带异响
①检查传送带是否调的太紧
②传送带压片是否压得太紧
③检测是否有外力影响传送带运动
9、喷头漏料
①检查喷嘴、加热块、喉管的连接，用扳手拧紧
②更换打印头
10、模型错位
①对模型进行切片时发生错误
②确保在打印过程中无外力干扰打印机打印
③参照电机丢步方法解决
Ⅴ.Frequently Asked Questions
1.Unable to read SD card data
①Try to restart the printer;
②Make sure the file extension is .gcode;
③The file name is composed of English、Numbers etc., if use other languages may not be
displayed;
④The SD card is damaged, try to replace it with a new SD card.
2.nozzle blockage
①Try to replace the spare nozzle;
②According different filament to preheat to the specified temperature, and by manually; pressing
filament, so that filament extrusion smoothly from nozzle;
③Remove the print head and clean up the nozzle and throat;
④If the nozzle is damaged, replace it.
3.The extruder slips
①Adjust the mechanical adjusting nut of extruder to make the friction force of extruder feed filament
moderate;
②Check whether the supply of filament is stable and prevent filament from winding;
To Next Page
Loading...
Need help?
General