IDEAL Networks SignalTEK NT - Port and Test Mode Details; RJ45 Setup and Test Categories; Link and Remote Test Modes

SignalTEK NT 156875 Iss 3
User Guide Page 38
Ports
RJ45
Fixed Setup
Speed – Auto negotiated
Duplex – Auto negotiated
MAC – Factory set
Tests
Automatic mode selection depending on detection of Network / Remote
Unit:
No-Link (No network or Remote Unit detected)
Link (Active network detected but no Remote Unit)
Link-Remote (Remote Unit detected through a network device)
Remote (Remote Unit detected but no network)
Active Remote (Active remote #1 - #12 detected)
Link Mode Tests (Active network detected but no Remote Unit)
- IPv4 Ping
- IPv6 Ping
- Traceroute v4
- Traceroute v6
- Netscan
- PoE / PoE+ Load
- Hub Blink
- Auto
 IPv4 Ping
 IPv6 Ping
 Traceroute v4
 Traceroute v6
 Netscan
 PoE / PoE+ Load
Remote Mode Tests (Remote Unit detected but no network)
- Double-ended Wiremap
- Cable Performance
- Auto
Link-Remote Mode Tests (Remote Unit detected through a
network device)
- VoIP Performance
- Web Performance
- Video Performance
- CCTV Performance
- IPv4 Ping
- IPv6 Ping
- Traceroute v4
- Traceroute v6
- Netscan
- PoE / PoE+ Load
- Hub Blink