IDEAL Networks SignalTEK NT - Optical SFPs and Software Update

SignalTEK NT 156875 Iss 3
User Guide Page 39
Ports (continued)
RJ45
Tests
- Auto
 VoIP Performance
 Web Performance
 Video Performance
 CCTV Performance
 IPv4 Ping
 IPv6 Ping
 Traceroute v4
 Traceroute v6
 Netscan
 PoE / PoE+ Load
Active Remote Mode Tests (Active Remote #1 - #12 detected)
- Double-ended Wiremap
- Tone Generator
- Auto
• Double-ended Wiremap
No-Link Mode Tests (No network or Remote Unit detected)
- Single-ended Wiremap
- Tone Generator
- Auto
Service Detection
Detected Services - PoE / PoE+ (802.3af/at. Not Cisco pre-standard)
- ISDN
- PBX
- Unknown
Optical
Supported SFPs
The following SFP types are supported. Use of other types of SFP is
possible but correct operation is not guaranteed.
SFP Type SX
Manufacturer Part # - Avago AFBR-5705PZ / Apac LM28-C3S-TI-N-DD
Speed - 1Gb/s
Fiber Type - Multimode
Wavelength - 850nm
Connector Type - LC Duplex
SFP Type LX
Manufacturer Part # - Avago AFCT-5705PZ / Apac LS38-C3S-TC-N-DD
Speed - 1Gb/s
Fiber Type - Singlemode
Wavelength - 1310nm
Connector Type - LC Duplex
SFP Type ZX
Manufacturer Part # - Apac LS48-C3U-TC-N-DD
Speed - 1Gb/s
Fiber Type - Singlemode
Wavelength - 1550nm
Connector Type - LC Duplex